From the archive.

Something different today. A picture taken on 12th August 1987 by Mac Hawkins and given to my father by his late friend Bob Goodfellow.

News.

No pictures today- just a round up of recent news.
Firstly, Hattons are stocking TT-here Continental 1:120 to be accurate- Tillig Train Sets to be precise but it is a start. Whilst to continental outline there may be a use for some of the stock or, if we are really lucky, someone might spot it and produce 3mm scale!
Secondly, I was disappointed to see that Simon Kohler is to leave Hornby. I met Simon several times and he was always up for a chat and was the perfect ambassador for Hornb. It must have been a hard task to answer for circumstances that were beyond your control and probably his remit. Still, I understand he is to continue in a consulting role for a time- after that I wish him well and am sure he will excell in his future career.

Valejo Black Undercoat.

Just a few minutes of modelling time so I thought I would brush on an undercoat on the many figures I have to paint.
After a quick shake as it says on the bottle and a soft brush in hand it took only a few minutes work to see these undercoated.
Quick drying this stuff- so quick that the figures didn't stick to the paper after most fell off the screws topped with blue-tac that I was using!
Well the blue -tac is old, must dig out the fresh stuff before the next stage.

More Flowers from Mininatur.

Those nice people at Antenocitis Workshop also provided some more flowers for the layouts- Red, white,Yellow and Violet- best supplier i could find for these excellent range of floristry!
Excuse the poor photo, they look so much better when planted.
At just over £4 each these packs provide, as before, an excellent display of colour- again I am just a happy customer with no link to the business.
As an aside, we will have another booking for Teignford later this year. Will confirm venue and dates when confirmed.

Linic Multi Angled Guillotine.

I remember when Proops was in the Tottenham Court Road. Used to have a quick look and buy whenever I could get a parking spot- many years ago now.
Well- I was looking for a supplier of 'The Chopper'
 made by NWSL if I remember correctly, my mate Colin has one.
I had a quick look at Proops website and lo and behold they had this for under a tenner. Plus a few spare blades until I can find out wether I can use single edge razor blades.
To cut a story short I ordered one and this has landed on the doorstep.
 I really want it to cut roof tiles/ slates for buildings and I think this will do the job- can't wait to get cutting.
So the moral of this post? Look around the web- and Proops- there is a
wealth of modelling tools to be had- just takes a bit
 of time.

Antenocitis Workshop Static Grass.

Following on from the last post, I ordered a few things from Antenocitis, who are primarily a wargaming trader.
However, they also sell many scenic items which the 3mm modeller can use and this is one.
1mm Summer Grass Mix will do nicely for East Boldre as I already have some longer stands to use, but as many say, mix the colours- so I will!

Valejo Black Surface Primer.

Those of you who have been paying attention may have remembered that I had a number of white metal figures to paint. Being somewhat lazy (or Knac****) of late I hadn't the time or inclination to venture into my still wet shed.
So I was looking for a household friendly primer, preferably acrylic.
Whilst browsing I found this- Surface primer by Valejo. I know their paints are good because Tom- The Weatherman , always uses them and I had heard that this black primer would do what I wanted- time will tell.
I got this and a few other things which I will bore you about later in the week from Antenocitis Workshop -their service is excellent and have keen prices- no other connection other than a satisfied customer.

More Morris 8.

 Once the headlamps are fitted, a minimum amount of flash is filed off below the engine bay to enable the body to sit square on the chassis.
The four wheels are superglued on the axles and left to dry. It is a simple matter to fix the complete axles into place, snug fitting in both cases.
The spare wheel is positioned and the rear bumper, with luggage carrier (no boot on one of these!).
And there we have it, a completed Morris 8.
Just some painting to do now but I think a few more things need preparing before breaking out the paint!
Just need to undercoat the animals now.

3MM Society Morris 8.

 This really is a smashing little kit. Laziness overtook me-again- and I didn't open out the windows, maybe a mistake but we will see.
There are no instructions, just an exploded diagram but with only a few parts assembly is really self explanatory. The only thing to do is drill out the front wings to fit the headlamps.
Minimum cleaning up is needed but you will have to wait for completion.
Till then I hope the pics capture the parts, I seem to have finally mastered this camera!

Etched Brass Windows.

As you can see, these are 3MM Society DS 23, etched brass Engine Shed windows.
They can of course be used for other things- which they probably will.
Until then, they are excellent etches which would grace any building.