3MM Society Mica Kit

Here are a couple of models made from the latest 3mm Society kit. The one on the left is a Dia. X5 as per the kit whilst the other is representative of a Dia. X9. Quite a lot of effort has gone into these including etches for steps and plates attached to the ends and frame.
Coming shortly is a tractor! I have been looking for one in 3mm for some time and have now managed to find a source. At the moment it is still in primer and will soon be painted to represent a Case L42 from which the model is derived. Watch this space.

My latest layout has been revised to be a terminus to fiddleyard in a U Shape.

Hennock is due to appear in 2011 at:-
Wilton-7/8th May
Andover 3/4th September
Weymouth 29/30th October.

Western Region Toad Brakevan

Some time since last addition. Have been working
on various projects including a couple of new Toads. Both have been made from 3mm Society kits. The handrails have been added by using microrod. They are slightly too big in depth but was the easiest way to add them.
I also have a new camera, this time an Olympus X-940 due to the breakage of the Canon used previously.
New bookings have been recieved for 'Hennock', these will be published shortly.
Plans for our Westfest exhibition in Bournemouth are coming on, this will be on17th September this year in Bournemouth.

Replacement Cattle Dock

The original Cattle Dock was always a stop gap. After the last exhibition I took the plunge and made this replacement. It has been tailored to fit the existing site and was made with Plastic strip of various sizes. Some new cows were also added to make it that much more 'used'. The next update will be the Farmhouse, always a makeshift building that was quickly made but to me doesn't look right. I hope to make an older building, not so large in height-watch this space.

The other photo shows the delightful Scammel Mechanical Horse and trailer as available from the 3mm Society,sorry the image is a bit fuzzy-I will master this camera one day! A simple white metal kit painted in early BR Blood and Custard, the trailer is modelled with the wheels down and usually it stands in the Cider Factory entrance.

Saturday see's Hennock at Burnam MRE-say hello -there are three 3mm layouts-who said 3mm is dead!

Wimrail April 2009

Pictures taken during the Wimrail Exhibition attended in April 2009.

Two Autocoaches, on the left a Brynkits A29 finished in Maroon. This is a fold up kit supplied complete. The Hawksworth on the left has 3SMR sides and Bogies with Worsley Works ends, chassis and roof

A Brynkits Bedford OB. A cast resin kit, this makes up into a lovely model.

Another view of Hennock station building, signals have been added plus a few more bits of station furniture.

Any comments will be gratefully recieved, no way of knowing who or how many have visited.

Group Members

Some of the Group members-from right-Robert,

nigel and Dave.

Nigel, our electrician, hard at work

New Layout Takes Shape

This is the updated view of my new 3mm scale layout. Using Peco Hom track and points it is a continuous circuit approximately 11ft x 4ft 6ins. As yet without a name but again an ex GWR branch which at some time has been reduced to single track running.

With live frog points, these are operated by slide switches and wire in tube.

New Layout

Following on from the success of Hennock, I have commenced on a new layout. It is a continuous run of 11ft X 4'6'' based again on British Railways (Western Region). The track plan is similar to Buckfastleigh but has an additional bay platform from which a Southern Region M7 with Maunsell Push Pull set will operate. No name yet but is West Country themed. Track laying is almost complete and wiring will commence shortly

Morris Commercial

Areally fine casting by Worsley Works

Following several observations, I have repositioned the Water Tower and signal on the downside platform. Sorry about the poor photo.

Some time since last post

Due to my camera losing it's connecting lead, I have been unable to provide new pix. New camera is now in action but my proficiency with it is somewhat questionable.
On Friday last, I participated in a mini-exhibition at Purbeck Model Railway group at Harmons Cross next to the Swanage Railway line. I took the oportunity to test new camera and I attach some of the results.
Will post on a more regular basis as I also attended the AGM of the 3mm Society on Saturday, 17th May. Ipurchased a Brynkits 2251 Collett kit. This also came with motor and gearbox-a great bargain! Parts to complete ongoing projects were also obtained so there is no excuse to finish those items.