Hennock was inspired by my eldest daughter whilst sat on the platform of Staverton Station in Devon.
In an effort to get away from Ready to Run I chose 3mm scale to model this layout having previously exhibited a large Tri-ang TT layout. I hope the ramblings that all to frequently appear will be of use to you no matter what scale!
The track diagram shows a simple passing station with a couple of sidings. All track is PECO Hom-12mm gauge with turnouts operated by the wire in tube method. Control is provided by Gaugemaster HH with feedback.
Locos are mostly whitemetal kits running on etched chassis powered by Mashima 9/16 motors with Branchlines 40:1 gearboxes. Wheels are Markits with the latest 3mm Society products being introduced.
Coaches consist of Society 'B' Sets and coaches from etches by Worsley Works, Brynkits and 3SMR. A vast range of wagons are from the 3mm Society list with Finney and Smith providing the China Clay , Gunpowder and a few etched kits.
Hennock has appeared in Railway Modeller and Model Rail.
Please visit the links to the left - 3mm is the Premier Scale for modellers-


General view of Layout.The facia has since been varnished.

The Degree Inn

The Degree Inn
In recognition of my eldest Daughter's achievement. She is also the one who gave me the push to build the layout.

14XX and Autocoach

14XX and Autocoach
Shows Station building-based on Staverton.

Hennock Track Plan

Hennock Track Plan

Wednesday, November 23, 2011

Worsley Works Drewry 04 Diesel Shunter

Looking to add another layout, I have been looking
at a small single board effort which would be ideal for
one day shows.
As a result, I think a change in motive power may be in order so, with a Hymek already in assembly, I looked for a small shunter to complement .
Having aquired some small wheels and a motor/gearbox this seems to be the answer.
Etched in Nickle Silver, these two sheets are extremely well produced. There are numerous fold lines etched on the rear to aid bending the curved bonnet.
Shown below and cruelly enlarged is the rear of the cab choices- the one I will use is the one with the chevron lines already etched.

No comments: